deflection deformation meaning in Chinese
挠曲变形
Examples
- As an application of this fem preprocessing system , the simulation on the welding process of missile ’ s oil box was performed , in which the effects of the welding sequences of four web plates and welds on each web plate are primarily analyzed . the simulation results show that the deformations under varied welding sequences are almost the same . downward deflection deformation is obtained along the weld longitudinal direction in the structure as well as upward deflection deformation along the weld traverse direction
对于某型号导弹油箱结构焊接过程的数值模拟计算,主要考察了每块立板上各段焊缝焊接顺序的调整、四块立板之间不同的焊接顺序以及焊接起始端的选择对结构焊后变形的影响规律,模拟结果表明:壁板在各种焊接顺序下的整体变形规律基本相似,即焊后壁板沿焊缝纵向发生了向下的挠曲变形,中部向下变形量最大;沿焊缝横向发生了向上的挠曲变形,壁板两端部变形量较大,且壁板前端变形大于壁板后端。 - Through discussion and comparison of some numerical results with the corresponding tested results , it demonstrates that the proposed finite volume method can accurately and effectively predict the static large - deflection deformation behavior and harmonically excited and wind - induced vibration behavior . the method is also of high computational efficiency
通过对计算结果进行分析，并将部分结果与实测结果进行比较可以发现，本文的数值方法能够较为准确有效地预测悬索的大挠度静态受力和变形特性，预测悬索的简谐激振、风振等动力响应，并具有较高的计算效率。